High Quality Hard Capsule Filling Machine

锡诺普手工半自动卧式胶囊filling machine is a new type of medicine filling machine with a novel structure and attractive appearance. This machine is developed on the base of the DTJ-C model machine(old type), it is more easy, convenient, higher filling accuracy compare with the old one. All the capsule filling format(tooling/mold) parts are made in cylinder type positioning device, that can reduce time to change the mold, only 5-8 minutes, all the job of mold exchange can be done.Under both electrical and pneumatic control and equipped with an automatic electronic counter and computer-controlled speed-adjusting device, the horizontal capsule filling machine can accomplish the positioning, separation, filling, and locking of capsules. In place of manual capsule-filling, it can reduce labor intensity and raise productivity. Its filling amounts are accurate and up to sanitary standards for pharmaceutics. China machine-made or the imported capsules are applicable to this capsule filling machine, with which the finished product qualification rate can be above 99%

The equipment can be used to glue and seal hard capsules filled with liquid, particle and powder, etc., so that the products can always be sealed in the process of packaging, storage and transportation.It can effectively prevent the volatilization of volatiledrugs, increase the shelf life of drugs, so as to improve the stability of capsules and drug safety.At the same time, itis alsothe quality assurance of high-end products for pharmaceutical enterprises and health products enterprises.

The machine is used for the label pasting on all kinds of flat surface of all kinds of objects, including the flat bottles or packing boxes for cosmetics, or the labeling on plastic lids, etc. Working principle:When the sensor senses the target, or the foot pedal gives the signal, the sucking head on which one label is sucked will lower, a piece of label will be pasted and be pressed well, and then the sucking head will return to take next label, and wait the next signal. Operation: Feed target products —> Position sensing by the sensor or by manual control —> Paste a label and press it (automatic) —> Take out products after the labeling

Products Advance Merit1Four sets of independent lubrication system.1.Thin oil lubrication system: thin oil filtering, oil keep tidy all the time, effectively control temperature , which mainly function on main axis, pressure wheel, inner ruler ring etc, other machines from other companies use dry oil lubrication function, which is very backward.2.Thin oil lubrication is used for upper and lower punches&die lubrication.3.The grease lubrication system is used for hat lubrication for upper and lower punches&die, at the same time, having the decrease vibration, and noise function, and lubricated some bearing, leading screw, moveable parts can be lubricated.4.Upper and lower press wheel are lubricated by the grease lubricating system.21.Double transmission, big torsional movement, high loading ability.2.Upper and lower double force feeding system.3.Lengthen the ration cam, which increase the number of controlled punches&die.4.Adopt PE material , subsection assemble cam.

Thecapsule filling machine is a new design of medicine filling machine with a novel structure and attractive appearance. This machine is developed on the base of the CGN208D model machine(Ordinary type), it is more easy, convenient, higher filling accuracy compare with the old one. All the capsule filling format(tooling/mold) parts are made in cylinder type positioning device, that can reduce time to change the mold, only 5-8 minutes, all the job of mold exchange can be done.Under both electrical and pneumatic control and equipped with an automatic electronic counter and computer-controlled speed-adjusting device, the machine can accomplish the positioning, separation, filling, and locking of capsules. In place of manual capsule-filling, it can reduce labor intensity and raise productivity. Its filling amounts are accurate and up to sanitary standards for pharmaceutics. China machine-made or the imported capsules are applicable to this machine, with which the finished product qualification rate can be above 99%

The equipment can be used to glue and seal hard capsules filled with liquid, particle and powder, etc., so that the products can always be sealed in the process of packaging, storage and transportation.It can effectively prevent the volatilization of volatiledrugs, increase the shelf life of drugs, so as to improve the stability of capsules and drug safety.At the same time, it is alsothe quality assurance of high-end products for pharmaceutical enterprises and health products enterprises.

混合和制粒程序和完整模型ted in the same vessel of the granulator. Powdery materials in the stationary conic vessel remain in a semi-flowing and rolling state owing to the agitation by a blending paddle, and are fully mixed. After pouring in adhesives ,the powdery materials gradually change into fine, damp granules turn moist and their shapes begin paddle and the inside wall of vessel, powdery materials turn into loose, soft materials. Through the action of granule shaping paddle, the soft materials gradually change into fine, damp granules with the same size.

Wholesale Capsule filling machine with discount! with good price - Sinopedwelcome inquiry!

ZPW Series Tablet Press is particular design for Effrvescent Tablet, press granule into effervescent tablet directly. Screw type punches, after Quenching&Special processing, can avoid Powder Stick to Punches effectively. It has better effects for material are viscosity, worse flow, easy to moisture, adopt special de-moulding way, widely used in pharmacy industry.

QGBS 500 aerosol filling machine has been improved, optimized and integrated from the original semi-automatic aerosol filling machine. The semi-automatic filling, sealing and inflating machines are mounted on a workbench. All actions can be completed simultaneously by one person operating the foot valve. Fast speed, high precision, good stability, saving time and effort, it is an ideal choice for small and medium aerosol manufacturers

This machine is used for the liquid filling into vials, including antibiotic, lyophilized agent, liquid preparation, blood products, veterinary medicine or nutrient solution etc., in industries of biological products and blood products, especially for the freeze-drying industry. There are advantages of advanced control system, accurate loading, stable performance and beautiful appearance. The machine can be connected in the production line.

Working Principle When air is purified and heated, it is introduced from the bottom of induced-draft fan and passed through the screen plate of raw material,. In working chamber, the state of fluidization is formed through stirring and negative effect. The moisture is evaporated and removed rapidly and the material is dried quickly, Applications: Use screw to extrude and vibrate granule and granulate granule using the methods of humidity, high speed and mixing;Suitable for drying humidity block or powder raw material in the fields such as pharmaceutical , foodstuff, feedstuff, chemical industries and so on;The raw material is large in granule and small in block and having adhesive property;Suitable for raw materials, its volume will be changed when dry, such as giantarum, polyacrylamide, etc.