The capsulefilling machineadopts an open design, which has the characteristics of economy and strong applicability. Welcome to understand the operation steps of capsule filling machine
8 steps ofcapsule filling machine
1. Press the green button in the "power switch" to turn on the power. the
2. Slowly adjust the "vibration intensity adjustment knob" and turn it clockwise. At this time, the finishing tray integrated with the "vibration bracket" starts to vibrate. Touch the finishing tray with your hands and adjust to a certain vibration intensity by feeling. the
3. Put the powder-filled capsule shells into the "powder-filled capsule shell finishing tray", and put about 300 capsules each time. Put the capsule caps into the "capsule cap finishing tray", about 300 capsules each time. The finishing tray is made of plexiglass plate, and there are many round holes in the shape of upper, lower, and lower funnels drilled on it. The diameter of the round holes corresponds to the diameter of the capsule number. the
4. In about 30 seconds, the powder-filled capsule shell and capsule cap will fall into the round hole with the opening facing upwards. In case of individual openings facing downwards, the capsule cap can be used to gently press down on the sleeve to pull it out. the
5. Hold the connecting plate of the powder-filled capsule shell horizontally (the one drawn at the end of the figure, which has been prepared randomly, and there is a round hole in the connecting plate), and gently push in the lower part of the sorting tray, and the shell of the powder-filled capsule in the sorting tray will be released. It will fall down into the round hole of the connecting plate, and then take out the connecting plate. In the same way, take out the capsule cap with the capsule cap adapter plate. the
6. Prepare a square medicine powder plate with a bottom area of 500×500mm2 and a height of about 10mm on four sides, which contains medicine powder, and place the powder-filled capsule shell joint plate on the medicine powder square plate. Then cover the random plexiglass frame on the connecting plate of the powder-filled capsule, use a small bucket to shovel the powder into the frame, scrape the edge of the frame to fill the powder, and scrape off the excess powder. the
7. Use the random capsule cap set plate (drawn at the end of the picture, there are round holes on the set plate), put it on the capsule cap connecting plate, with alignment holes, it is easy to place. Turn over the connecting plate of the capsule cap so that the opening of the capsule faces downwards, and put it on the connecting plate of the shell of the powder-filled capsule that has been filled with medicine powder. There are also alignment holes, which are easy to fit.
8. Put the nested capsule plate into the cavity under the "capsule cap forming plate", and pull the "pressure lever" downward by hand to put it in place. Don't be careful with excessive force, because there is a positioning mechanism to control the downward pressure high. Take out the sleeved capsule plate and pour out the capsules.
Get In Touch With Us
The first thing we do is meeting with our clients and talk through their goals on a future project.
在这次会议期间,随时与您沟通ideas and ask lots of questions.