胶囊充填机是一种灌装机used to fill powder, granule or liquid containing pharmaceutical ingredients into capsules. It is a commonly used filling equipment in the pharmaceutical industry. It integrates machine, electricity and gas. It can automatically complete operations such as positioning, separation, filling, locking, and counting, which greatly reduces manual labor intensity. Compared with manual operation, the capsule filling machine has a higher degree of intelligence and significantly improved production efficiency. This equipment meets the requirements of pharmaceutical hygiene and is widely used in many pharmaceutical companies.
The main components of thecapsule filling machineare composed of an empty capsule feeding device, a capsule dispensing device, a powder feeding device, a metering plate mechanism, a capsule filling and sealing mechanism, a main transmission mechanism in the box, and an electrical control system.
Classification:Capsulefilling machines can be divided into hard capsule filling machines and soft capsule filling machines.
Scope of application:Capsule filling machine is suitable for small and medium batch production of capsules in small and medium-sized pharmaceutical factories, health care products factories, hospitals and clinics.
1. The automatic hard capsule filling equipment adopts intermittent action and hole plate filling. The filling and turning parts are fully closed and easy to clean;
2. The upper and lower modules of the capsule filling machine move in one direction, and the imported double-lip polyurethane sealing ring has good sealing performance;
3.The module cleaning station of the capsule filling machine combines air blowing and air suction, and the mold hole is free of dust during high-speed operation;
4. The locking station of the capsule filling machine is equipped with powder suction equipment;
5. The capsule discharge station of the capsule filling machine is equipped with a capsule ring, so there is no dust flying.
operation method
1. Press the green button in the power switch of the capsule filling machine to turn on the power;
2. Slowly adjust the vibration intensity adjustment knob clockwise. At this time, the finishing tray integrated with the vibration bracket starts to vibrate, and adjust to a suitable vibration intensity;
3.把胶囊壳放入胶囊壳rting tray, and put the capsule cap into the capsule cap sorting tray, the quantity is equal. Generally speaking, there are many round holes with upper, lower, and lower funnels drilled on the sorting tray. The diameter corresponds to the diameter of the capsule, and the capsule shell of the vibrating worktable moves slowly back and forth, so that the capsule shell enters the hole of the platen;
4. The capsule shell and capsule cap fall into the round hole with the opening facing upwards. If some openings face downwards, you can use the capsule cap to gently press the sleeve down to pull it out;
5. Hold the capsule shell connecting plate horizontally, and gently push in the lower part of the sorting tray, the powder-filled capsule shell in the sorting tray will fall down into the round hole of the connecting plate, and then take out the connecting plate. In the same way, take out the capsule cap with the capsule cap connecting plate of the capsule filling machine.
Precautions for use
1. As a vibrating machine, the fastening of the screws in each part should be checked frequently. If there is any looseness, it should be tightened in time to prevent failure and damage.
2. The plexiglass parts (worktable, medicine board) should avoid direct sunlight and close to high temperature, and no heavy objects should be placed on it. The medicine board must be placed vertically or flat to avoid deformation and damage.
3.The electrical shell and body must be grounded to ensure safety, and the power supply should be cut off after work.
4. After working every day, the residual medicine on the machine and in the mold hole should be cleaned to keep the whole machine clean and hygienic, and avoid washing the main machine with water. If the mold on the machine needs to be cleaned, the fixing screw can be loosened, and then it can be taken down, which is convenient for installation.
Get In Touch With Us
The first thing we do is meeting with our clients and talk through their goals on a future project.
During this meeting, feel free to communicate your ideas and ask lots of questions.